Combustible Gas Detection

Beabout Company offers combustible gas detection from Detector Electronics. Detector offers a wide range of fixed infrared, catalytic, and toxic gas detectors.

Pointwatch (PIRECL) IR Gas Detector
The all-new Eclipse IR gas detector delivers exceptional detection of flammable hydrocarbon vapors in lower explosive limit (LEL) range. Ideally suited for on- and off-shore oil and gas facilities, the PIRECL delivers a number of unique features and benefits including stainless steel construction for maximum strength, and a new multi-layer optics protection weather baffle for unequalled protection in harsh environments.

Pointwatch (PIR9400) IR Gas Detector
The PointWatch^TM PIR9400 Infrared detector offers the lowest cost of ownership for detection of hydrocarbon combustible gases and vapors. It is virtually maintenance free and will detect gas concentrations within the 0 to 100% LFL range with a corresponding 4 to 20 milliampere (mA) output signal. Benefits include continuous self-testing, immunity to poisons such as silicone and hydrides and ability to perform under the harshest conditions.

Open Path (OPECL) IR Gas Detector
Det-Tronics offers an open path gas detector for measurement of hydrocarbon vapors in the lower explosive limit per distance (LFL-meter) detection range. Ideally suited for open path gas detection applications in oil, gas, and petrochemical facilities, the Open Path Eclipse model OPECL provides a number of unique features and benefits: Rock-solid mounting fixture
- 100% Stainless Steel for maximum strength
- Integral wiring termination compartment for easy installation
- 4-20 milliamp analog, HART, and RS-485 Modbus outputs
- Tri-Color LED provides external status indication
- Routine calibration not required
- FM performance approvals and CSA and DEMKO hazardous (classified) locations
- Optional Relay Package (2 alarms, 1 fault)

IR Gas Transmitter (U9500 Infinity)
The U9500 Infiniti transmitter family are globally-approved, explosion-proof fixed gas detectors that provide an on-board LCD display, non-intrusive calibration, and exceptional diagnostics. Models are completely compatible with the full range of Det-Tronics catalytic combustible, infrared, and toxic gas sensors. Signal outputs include a linear isolated 4 to 20 mA output, and optional 3 alarm/1 fault relay package.

Duct-mount (PIRDUCT) IR Gas Detector
The PIRDuct "DuctWatch" combustible IR gas detector is specially designed to deliver reliable gas detection in enclosed airhandling ductwork applications. Safety engineers have long been aware that duct air monitoring provides the ability to maximize protection of confined spaces in challenging industrial applications.

Volumetric (PIRVOL) IR Gas Monitor
The model PIRVOL IR gas monitor is designed to monitor hydrocarbon vapors in the range of 0-100% by volume, and is ideally suited for oil and gas wellhead mud-logging, hydrocarbon processing, and other extractive sampling applications. The PIRVOL provides superior life-cycle costs over destructive hot-wire measurements such as thermal conductivity and catalytic element sensors. In addition, the PIRVOL can replace expensive gas chromatographs in many gas exploration drilling applications.

Mining IR (MIR) Fixed Methane Gas Detector
In underground mines, you must quickly and reliably detect the presence of methane gas. You require a gas detector that won?t let you down ? ever.

The MIR, a point-type IR gas detector, is superior to catalytic sensors for detecting methane gas in underground mines. It provides a fast response time, long life, low maintenance requirements, and self-testing operation.

In addition, MIR has MSHA approval for use in gassy underground mines (Approval No. 18-A070003-0).

Catalytic Combustible Gas (CGS) Detector
The catalytic combustible gas sensor (CGS) is a globally-approved, stainless steel sensor that is poison-resistant. It provides unmatched detection of almost all combustible gases in harsh industrial environments, and is compatible with the entire line of Det-Tronics combustible gas transmitters and controllers. The CGS must be used with a compatible transmitter to provide proper operation.

Combustible Transmitter (505)
The Model 505 Transmitter provides extremely cost-effective protection and performance. Used exclusively with our model CGS catalytic gas sensor, the 505 provides one-person calibration capability using a standard digital volt meter. The 505's analog 4 to 20 mA output signal is compatible with our model R8471A rack-mount gas controller, or virtually any analog input from a distributed control system or PLC.

Single-channel Rack-mounted Gas Controller (R8471)
The family of R8471 single channel controllers continuously monitor the analog 4 to 20 mA signal output from any Det-Tronics gas detector. Each R8471 controller provides at-a-glance visual indication from high visibility bar-graph and digital readout LED displays, high intensity alarm LEDs, and optional alarm relays. A variety of mounting racks and cages are available. Be sure to inquire about our special controller package for multi-point gas system cost-savings!

Direct Multi-channel (DMC) Gas Controller
The DMC (Detector Multi-channel) Gas controller is a robust wall-mounted multi-sensor gas controller delivering reliability within a cost-effective design. Compatible with up to 36 channels of toxic and/or combustible gas detection, the DMC offers panel-selectable configuration of sensor types, ranges, and alarm output levels. Weighing less than 9 pounds, the weatherproof DMC enclosure is easy to install and commission, and delivers exceptional protection for a wide range of industrial applications. Available with or without a variety of pre-installed 24VDC power supplies that are compatible with domestic & international 120/240VAC main supplies